FAQs - Page 116 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

How to convert an RBT-4102 access point to work with a HiPath controller

Article ID: 11812 Products RBT-4102C, RBT-4102-EU, HiPath Goals Upgrading my existing thin (RoamAbout Switch Solution) or thick (Stand Alone) RBT-4102 to be part of a solution. Solution * *Please note the process defined below is to move an RBT...

How to do a password recovery on the C20/C20N/C2400

Article ID: 11743 Products C20, C20N, C2400 Goals Password recovery process for the HiPath wireless controllers. Solution 1. Use the serial port of the controller to connect to the local console. Note1: To enter the Rescue mode, you must conne...

IdentiFi AP Reboots with "AP auto recovery event 0002" message

Article ID: 14990 Products IdentiFi Wireless Controllers and Access Points Symptoms Access Point (AP) reboots. Controller log reports a Critical message: "AccessPoint Rebooting due to: AP auto recovery event 0002". Cause This is due to excessive...

IdentiFi Wireless Controller f/w 8.21.06.0006 reporting High CPU Utilization for HTTPD Process

Article ID: 15085 Products C20, C25, C4110, C5110, C5210, V2110; firmware 8.11.01.0161 through 8.21.06.0006 IdentiFi (formerly Enterasys, HiPath) Wireless Controller Symptoms Users are unable to connect to the Wireless network. -and/or- Overall...

Power & BTU Information for the K-Series

Article ID: 15111 Products K-Series Goals Power Calculations tool. Estimation of Power, UPS, and Air Conditioning requirements. Number of power supplies for a given configuration. Breakout of BTU, ACVA, DCA, Amps, Watts. Solution The K-Series "...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN