FAQs - Page 120 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Persistence of Securestack Configurations after a Config Change

Article ID: 5482 Products SecureStack C5-Series, C3-Series, C2-Series B5-Series, B3-Series, B2-Series A4-Series, A2-Series Commands 'save config' 'set snmp persistmode' Goals Save the configuration Save to startup Save active Changes Changed c...

How to Copy a SecureStack Configuration between DRAM and Flash

Article ID: 5533 Products SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Commands 'show config outfile' 'configure' Goals Copy a SecureStack Configuration between DRAM and Flash Save configuration to Internal Directo...

About Multi-User Authentication on the DFE

Article ID: 5468 Products DFE N-EOS-PPC N-EOS-PUC Protocols/Features Authentication MUA 802.1x MAC Authentication PWA Solution Multi-User Authentication (MUA) is the ability to permit multiple users per port to authenticate using any combinatio...

Background regarding the 802.1Q TCI Priority bits and IP TOS (DSCP) bits

Article ID: 5811 Protocols/Features TOS DSCP QoS CoS Standards 802.1Q 802.1p Related to TCI Priority Goals Location of 802.1Q TCI / Priority bits Location / decode of IP TOS / DSCP bits Symptoms VLAN tag IP header Cause Any discussion of ...

S-Series S-AC-PS DC Power LED is off

Article ID: 12460 Products S-Series S-AC-PS Changes Installed an S-AC-PS non-POE power supply into an S-Series chassis. Symptoms The "AC OK" LED lights up, indicating that AC line voltage is sufficient. The "DC OK" LED does not light, indicatin...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN