FAQs - Page 126 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

S-Series SSA Ceases to Function and Fans go to High Speed

Article ID: 15047 Products SSA-G8018-0652 SSA-T1068-0652A SSA-T8028-0652 SSA-AC-PS-625W Symptoms Unit ceases to function. Management stops responding. No Host, Switching, or Routing operation. Power supply LED (on rear) is green, but no other LEDs ...

Which Slots to use for Fabric Modules in the S8

Article ID: 12539 Products Matrix S-Series S8 (8 slot chassis) Goals When a customer has two Fabric modules (the S8 supports up to three; in slots 4, 5, and 6), is there a recommendation as to which chassis slots should be used? Solution From a te...

Is there a performance hit when using S-Series fabric modules?

Article ID: 12030 The fabric modules are designed in such a way that there is no performance hit when performing their function of switching traffic for the other I/O modules.

What happens if an S-Series fabric fails and there is no backup?

Article ID: 12029 As the S4, S6, and S8 chassis needs at least one fabric module for operation, if a chassis is running with only a single fabric module and that fabric fails, all traffic through the system will stop forwarding. For this reason, the...

S-series Slot dependency for Fabric cards

Article ID: 11923 Products S-Series Discussion Are there slot dependencies in the S series chassis? Yes, there are two types of slots in the S-Series chassis. Fabric and I/O slots. Only Fabric cards will fit into the fabric slots of the chas...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN