FAQs - Page 17 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Setting and Clearing a 802.3ad Static LAG, on various products

Article ID: 6769 Products DFE Matrix C1 Matrix C2 Cause The code:lacp static lag command set, used for creating and removing Static Link Aggregation Groups, auto-generates a series of commands which then appear in the device configuration if they ...

How to Test a Quality of Service Configuration

Article ID: 5407 Protocols/Features QoS CoS ToS Standards 802.1p 802.1d Goals Test a Quality of Service configuration Verify the packet count in each priority transmit queue Symptoms Priority Solution Generally speaking, it is not possible to d...

Caution regarding the Use of 'tci-overwrite' on the N/S-Series

Article ID: 11091 Products Matrix N-Series DFE S-Series Changes Manually configured a policy profile so that code:tci-overwrite is enabled. Used the policy profile for VLAN-tagged traffic. Symptoms The VLAN assignment unexpectedly changes. Traffi...

Clearing a L2 Source MAC Address on the SecureStacks

Article ID: 7601 Products SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Goals Clear a MAC address from the SAT / BAF Symptoms 'clear mac' The 'clear mac' command has no option to clear MAC addresses Cause There is no...

SecureStack Generated a Trap referencing OID 1.3.6.1.4.1.52.4.2.31.1.0.1

Article ID: 10381 Products SecureStack C3, all firmware SecureStack C2, firmware 3.02.30 and higher SecureStack B3, all firmware SecureStack B2, firmware 3.01.16 and higher SecureStack A2, firmware 1.03.17 and higher Changes Configured to send SNM...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN