FAQs - Page 21 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

About the 'set logout' command on the DFE

Article ID: 7341 Products Matrix N-Series DFE Symptoms Cli session logout time changes may be volatile. Not saved to NVRAM. Cause The logout time is the maximum number of minutes that the (Serial or Telnet) cli application may await input from a ...

C2/B2/A4/A2-Series has SSH session error "nonexistent channel 0" with PuTTY v0.6x

Article ID: 16099 Products C2-Series; firmware 5.02.13.0003, 5.02.14.0002, 5.02.15.0002 B2-Series; firmware 4.02.13.0003, 4.02.14.0002, 4.02.15.0002 A4-Series, firmware 3.03.02.0002 A2-Series, firmware 3.03.02.0002 PuTTY; version 0.61, 0.62 Change...

show logging buffer

S4 don't display any logs on show logging buffer with "Show Logging Buffer failed, only one instance allowed" message on show support. Could you please verify if this symptom is hardware failure?

SecureStack does not Permit a User to be Statically MacLocked to more than One Port

Article ID: 11497 Products SecureStack C3, C2, B3, B2, A2 Changes Enabled MAC Locking (i.e. 'code:set maclock enable'). Created a static maclock entry for a MAC and Port (e.g. 'code:set maclock 00:12:34:AB:CD:EF ge.1.2 create'). Created a static m...

IdentiFi Wireless Controller Version 8 to Version 9 License Key Explained

Article ID: 16133 Products WS-REG9P-NAM, WS-REG9P-ROW, WS-REG9P-JP, WS-REG9P-IL WS-V2110-9-NAM, WS-V2110-9-ROW, WS-V2110-9-JP, WS-V2110-9-IL Changes IdentiFi Wireless Controller upgrade from major release version 8 to version 9. Symptoms User is ...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN