FAQs - Page 41 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

S/N/K-Series OSPF generates 'interface config error - BAD PACKET' messages

Article ID: 14802 Products S-Series Matrix N-Series DFE K-Series Changes The OSPF routing protocol has been configured on this device, and other OSPF routers exist on the local network. Symptoms An OSPF-originated "code:BAD PACKET" error messag...

Using the S/N/K-Series Router Debug Packet Filter to resolve Ping Issue

Article ID: 14495 Products S-Series, all firmware Matrix N-Series DFE, firmware 6.01.01.0020 and higher K-Series, all firmware Discussion This is an additional use of the router "Debug IP/Packet" feature, furthering what is explained in 14661. ...

Using the S/N/K-Series Router Debug Packet Filter to locate a Soft-forwarded Packet

Article ID: 14661 Products S-Series, all firmware Matrix N-Series DFE, firmware 6.01.01.0020 and higher K-Series, all firmware Discussion The router "Debug IP/Packet" feature logs information about packets that are being processed through the rou...

DFE with 'GBIC indicated TX Fault.' error message

Article ID: 7352 Products DFE Symptoms Error message "GBIC indicated TX Fault." Cause Examples of this repeating message are shown below, as extracted using a FlexView (5497 code:1001.1 2006-01-23,03:16:12.0 Syslog Message <code:3>code:Sy...

DFE f/w 5.41.25+ with Extra "GBIC indicated TX Fault." Error Messages

Article ID: 10385 Products Matrix N-Series DFE, firmware 5.41.25 through 6.02.05.0001 7G4280-19, 7GR4280-19 7G-6MGBIC, 7G-6MGBIC-A, 7G-6MGBIC-B 7K-2XFP-6MGBIC 7S-DSNSA7-01, 7S-DSNSA7-01NPS Symptoms CLI, Syslog, 'code:show logging buffer', or Faul...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN