FAQs - Page 46 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

NetSight - Traps not Being Received After Upgrade to version 4.4

Article ID: 15029 Products NetSight Console Changes Upgrade to version 4.4 was performed. Symptoms Traps are no longer being received in NetSight Traps view. Cause Code missing to make sure the trap file and the SNMP mode is correct after restor...

Power, BTU, & MTBF Information for the B5/C5-Series

Article ID: 13219 Products B5-Series C5-Series Solution B5-Series Product Description Max Amps Volt-Amps Power Watts BTU/hr MTBF hrs @110V @220V @110V Factor @110V @110V B5G124-24 ...

S/N-Series issues 'PIM_BAD_SYSTEMPORT' Error messages

Article ID: 14749 Products S-Series Matrix N-Series DFE Changes Recently upgraded firmware between major release lines, for example 7.21 -> 7.31 or 7.62 -> 7.71. Symptoms Syslog or Logging Buffer ('show support') display one or more "PIM_BAD_SY...

Translating Matrix N-series Trap vs CLI Port Numbering

Article ID: 5567 Products DFE Protocols/Features SNMP Traps Mibs Netflow Goals Translate trap vs cli port numbering Cause When an SNMP trap is received from a N-Series DFE system, port references do not directly reconcile to the ifIndex numbe...

About the Mib2 ifIndex numbering scheme used by the DFE

Article ID: 5456 Products DFE Goals Determine logical port number from MIB-2 ifIndex value Interface Numbering Scheme Explained Cause The ifIndex values show up as Instance information for all of the branches under the MIB 'ifEntry=1.3.6.1.2.1....

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN