FAQs - Page 55 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

802.1t STA Bridge Priority settings are limited

Article ID: 4832 Protocols/Features Spanning Tree Standards 802.1d 802.1t Goals STA Bridge Priority settings Change Spanning Tree Bridge Priority Symptoms Cannot set bridge priority Bridge priority can not be changed Bridge priority not worki...

Spanning Tree Algorithm Port Path Costs

Article ID: 4723 Protocols/Features Spanning Tree Standards 802.1d 802.1t Goals STA Port Path Costs Cause With the advent of ever-faster port speeds, new methods have arisen for allocating Spanning Tree path costs to ports, based on their spe...

Configure IVL and SVL Vlan Learning in DFE

Article ID: 5397 Products DFE Standards 802.1Q Commands 'set vlan constraint' 'clear vlan constraint' 'show vlan constraint' 'show vlan' Goals Change from ivl to svl Solution On the DFE, by default FID = VID, resulting in Independent VLAN L...

Configure the Matrix C1 / SecureStacks to IVL or SVL

Article ID: 5498 Products Matrix C1 SecureStack C3 SecureStack C2 SecureStack B3 SecureStack B2 SecureStack A2 Standards 802.1Q Solution The VLAN Learning Mode of the Matrix C-Series (Matrix C1, SecureStack C2, SecureStack C3), B-Series (Secure...

In 802.1Q, what is the difference between IVL and SVL?

Article ID: 4918 Standards 802.1Q Goals Vlan learning settings Symptoms Unicast flooding Solution For devices supporting 802.1Q VLAN functionality, there are two possible modes for the operation of the Source Address Table:IVL (Independent Vl...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN