FAQs - Page 58 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Converting G/D/C/B-Series Overtemp Threshold Percentages to Temperature Readings

Article ID: 11520 Products G-Series, firmware 1.02.00.0043 and higher D-Series, firmware 6.03.01.0008 and higher C5-Series, all firmware C3-Series, firmware 1.02.01.0004 and higher C2-Series, firmware 5.02.01.0006 and higher B5-Series, all firmware...

SecureStack f/w x.01.02.0007 with OSPF "failure in _checkTimers for thread" Error

Article ID: 10277 Products SecureStack C3, firmware 1.00.80 through 1.01.02.0007 SecureStack C2, firmware 5.00.59 through 5.01.02.0007 Changes Routing is enabled and OSPF has been configured, with VRRP. Symptoms Error messages similar to the fo...

SecureStack/G-Series with many "XX_Call() failure in _checkTimers for queue 0" errors

Article ID: 11984 Products SecureStack C3, firmware 1.01.04.0001 through 1.02.06.0004 SecureStack C2, firmware 5.02.03.0012 through 5.02.06.0004 G-Series, firmware 1.02.03.0010 through 1.02.06.0004 Changes Routing is enabled and OSPF has been con...

I-Series Power Requirements

Article ID: 12265 Products I-Series Discussion The I3H252 Hardware Installation Guide states, in the 'Power Requirements' section, Table A-8: Electrical Specification Input Power 24 VDC ~ 2.5 A Power Con...

Installation Manual for I-Series Power Supplies

Article ID: 10166 Products I3H252 I3H-PWR Solution Manuals for the Enterasys I-Series Industrial Ethernet Switch include material specific to each of the I-Series components except the I3H-PWR power supply modules. There are instructions for co...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN