FAQs - Page 63 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

SecureStack with 'Last switch reset caused by power cycle' in current.log

Article ID: 5766 Products SecureStack C5-Series, C3-Series, C2-Series B5-Series, B3-Series, B2-Series A4-Series, A2-Series Symptoms Error message from current.log "Last switch reset caused by power cycle" Cause An extract of a current.log file (...

C2-Series f/w 5.02.10.0003 Reboots with 'r(0): Error code 0x00000000' message

Article ID: 13508 Products C2-Series, firmware 5.02.02.0009 and higher Symptoms Unit reset. The current.log (5487) records an event with either no or corrupt BackTrace, and containing last switch reset reason "r(0): Error code 0x00000000". For ...

C2/B2/A2-Series with Errors Detected on SoC Unit

Article ID: 13509 Products C2-Series, B2-Series, A2-Series Symptoms Lost user connectivity. Not passing traffic. Some combination of "Cell pointer CRC errors", "Cell pointer block CRC errors", "SCHAN errors", and/or "Memory parity errors" detec...

G/C3/B3-Series with "CBP cell CRC errors detected" Syslog messages

Article ID: 12732 Products G-Series, C3-Series, B3-Series Symptoms "<count> CBP cell CRC errors detected on SoC unit 0" messages appear in Syslog, 'show logging buffer', and 'show support'. After the first message appearance, bridging/routing get...

S-Series with "Fuji RX MAIN" errors seen in the Logs

Article ID: 13512 Products S-Series Symptoms "FUJI RX MAIN" errors seen in the 'show support' output's logging buffer and messageLog sections. For example:<163>Oct 22 21:43:48 10.1.232.7 Fuji[1.tNimIntr]Fuji RX MAIN intr: Fuji=0, Adr=0, Reg=0x0...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN