FAQs - Page 65 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

N/S-Series NetFlow "Export Packets Failed"

Article ID: 14002 Products Matrix N-Series DFE S-Series Changes Running NetFlow (7485) data collection, then issued a 'show netflow' command. Symptoms Counters show a high rate of "export packet failure". For example:S4 Chassis(su)->show netf...

S/N/K-Series recommended Netflow Settings

Article ID: 13584 Products S-Series Matrix N-Series DFE K-Series Solution The default Netflow settings are those identified by the Netflow standard. These are:Template Timeout: 30 (minutes) [time between collector start and template receipt...

Frequently Asked Questions about Netflow on the DFE N-Series

Article ID: 7485 Products DFE Matrix N-Series Firmware 5.31.17 and higher DiscussionWhat defines the destination for the exported Netflow records? There is no default destination IP address, and the default destination UDP port is 2055. However, ...

Suggestions for NetFlow Collector implementation

Article ID: 12525 Products S-Series Matrix N-Series DFE Matrix X-Series X-Pedition Goals What can be used as a NetFlow information collector? Solution NetFlow is the collection of network packet flow data for subsequent analysis by network admi...

Expectations for NetFlow Support

Article ID: 7202 Products DFE Matrix E1 SecureStack C3, C2, B3, B2, A2 G-Series Protocols/Features NetFlow Solution The Matrix DFE has NetFlow v5 support as of f/w 5.31.17, and v5/v9 support as of f/w 5.41.25. The Matrix E1 and SecureStack C3/...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN