FAQs - Page 73 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

S-Series CPU Utilization Spike on the "Hardware Maintenance" task

Article ID: 12846 Products S-Series Symptoms The output of a 'show system utilization' command displays high CPU utilization on the "Hardware Maintenance" task. Possible module reset. In the output of a 'show support' command, the message log con...

SecureStack 'Detach' & 'ConfigMismatch' Symptoms

Article ID: 5876 Products C5, C3, C2-Series B5, B3, B2-Series A2-Series Symptoms Port has Detach oper status 'show port status' "Detach" Stack member has Config Mismatch switch status 'show switch' "ConfigMismatch" Cause One or more ports may d...

SecureStack's Permanent License is Expired

Article ID: 10081 Products SecureStack C3, firmware 1.00.80 through 1.01.01.0051 SecureStack C2, firmware 5.00.59 through 5.01.01.0051 SecureStack B3, firmware 1.00.74 through 1.01.01.0051 SecureStack B2, firmware 4.00.60 through 4.01.01.0051 Sym...

Message Logging Destinations on the Matrix N-Series DFE

Article ID: 7494 Products DFE Goals Message Logging Destinations Cause There can be confusion regarding the various forms of message logging - including the Syslog and Fault Log - available on the N-Series platform. This document is intended ...

Interpreting the S/N-Series System Logging Buffer

Article ID: 10188 Products S-Series Matrix N-Series DFE Solution The logging buffer, stored in (volatile) DRAM of each blade, contains the up to 256 syslog items generated by that blade since its last boot-up, as filtered by the application loggi...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN