FAQs - Page 92 - Extreme Networks

FAQs

Frequent Asked Questions

Forum Posts

Sorted by:

Start a conversation

Special Upgrade Instructions for DFE Firmware Upgrade from pre-7.x to 7.11.01.0025+

Article ID: 13533 Products Matrix N-Series DFE Firmware 7.11.01.0025 and higher Changes Upgraded DFE from pre-7.x to 7.11.01.0025+ firmware. Symptoms Lost configuration. Solution Before upgrading, please review the 7.x firmware background inf...

S/N/K-Series Reset of the Admin Password

Article ID: 5022 Products S-Series Matrix N-Series DFE K-Series Goals Reset password to factory default Password recovery Symptoms Lost password Forgot password Cause If the admin password is lost or forgotten, then the only way to create, ed...

How to Clear to Default Configurations, on a Matrix DFE

Article ID: 5296 Products DFE Goals Clear to default configurations Clear to factory defaults Reset admin password Clear NVRAM Solution To clear to factory defaults, use any of these four procedures. To reset the admin password (this will actua...

Default Username and Password for the DFE Product Line

Article ID: 5210 Products Matrix N-Series DFE Goals Default username Default password Default login Solution The default login usernames are admin (super-user), rw (read-write), and ro (read only); all with blank default passwords. The defaul...

DFE Boot Image may not be used upon System Reset

Article ID: 5804 Products DFE Protocols/Features Upgrade Commands 'set boot system' 'show boot system' 'dir' Symptoms Firmware version shown as boot image is not used upon system reset New firmware not loading "Current system image to boot" ...

Top Kudoed Authors

User

Count

26

1

1

1

1

GTM-P2G8KFN