Article ID: 14499
Products
C5-Series, firmware 6.42.08.0007 through 6.61.03.0004
Changes
Installed a MGBIC-LC01 and a MGBIC-LC09 uplink module.
Issued a 'show port status' command.
Symptoms
The MGBIC-LC01 may be displayed as being "Combo RJ45/
1000-lx", when it should be "...
1000-sx" (
9852).
The MGBIC-LC09 may be displayed as being "Combo RJ45/
Invalid", when it should be "...
1000-lx" (
9852).
This is a display issue only, applicable to the MGBIC-LC01 and MGBIC-LC09 from specific manufacturers.
Solution/Workaround
Upgrade to firmware 6.61.05.0009 or higher (
14480).
Release notes state, in the 'Changes and Enhancements in 6.61.05.0009' section:
&
code:Addressed an issue whereby the CLI displayed incorrect port descriptions for certain MGBIC-LC01 and MGBIC-LC09 modules.
Pre-upgrade workaround: Ignore the condition, which is harmless. The MGBIC will function correctly.
