Article ID: 14560
Products
G-Series, firmware 6.61.02.0007 through 6.61.08.0013
C5-Series; firmware 6.61.02.0007 through 6.61.08.0013, 6.61.07.0010 through 6.71.02.0008
C3-Series, firmware 6.61.02.0007 through 6.61.08.0013
B5-Series; firmware 6.61.02.0007 through 6.61.08.0013, 6.61.07.0010 through 6.71.02.0008
A4-Series; firmware 6.61.02.0007 through 6.61.08.0013, 6.61.07.0010 through 6.71.02.0008
Changes
Created a SNTP management interface (
5573) for a VLAN interface that is not operational.
Example: 'set sntp interface vlan 4'
Symptoms
Output of 'show system utilization' indicates a high CPU utilization percentage for the "SNTP" task.
Cause
The SNTP task is attempting communication on a VLAN interface that is not operationally up. This causes the process to hang, which increases CPU utilization.
Solution/Workaround
Upgrade to 6.61 firmware 6.61.09.0012 or higher.
Release notes state, in the 'Changes and Enhancements in 6.61.09.0012' section:
code:Addressed high CPU utilization resulting from shutting down a routed SNTP interface.
Also fixed in C5/B5/A4 firmware 6.71.03.0025 or higher (though not stated in release notes).
Pre-upgrade workaround:
Ensure that the selected interface is operational (loopback interfaces are by definition always operational), or do not use the interface command for SNTP configuration.
