Article ID: 15084
Products
S-Series
Matrix N-Series DFE
K-Series
Changes
Issued the 'set port negotiation...' command in order to modify the local auto-negotiation state, or issued one of the 'set port advertise...' or 'clear port advertise...' (
13285) commands in order to adjust feature advertisement to the attached peer port.
Symptoms
10-gigabit ports tend to respond to such commands with an error message; for example:S1 Chassis(su)->
set port negotiation tg.1.1 disable
tg.1.1 does not support specified feature.
S1 Chassis(su)->
clear port advertise tg.1.1 bpause
failed to get ifMauAutoNegCapAdvertisedBits on port tg.1.1.
tg.1.1 failed to be set.
S1 Chassis(su)->
Cause
Of 10-gigabit port media types (
9852), only a RJ45 "10GBase-T" connection supports auto-negotiation disablement/re-enablement or adjustment of auto-negotiation advertisement.
Any other 10G port type - whether copper or fiber - supports neither of these and will generate error messaging, the meaning of which may or may not be clear.
Solution/Workaround
Functions as Designed (FAD).
Workaround: In the case of a desired advertisement change, if the attached peer device supports the operation then make the change there. The auto-negotiated result will be the highest functionality that the two attached ports are advertised to support.
