Article ID: 14133
Products
S-Series
Symptoms
Module generates a "SPI4 error FAP21V_SPI_B_SOURCE_FRM_ERROR" message in the Fault Log ('show support'), then initiates a halt.
For example:==============================================================================
Message 14/129 Shutdown 07.21.01.0015 08/06/2011 13:04:35
Initiated - Halt
Shutdown process is starting.
==============================================================================
Message 15/129 Syslog Message 07.21.01.0015 08/06/2011 13:04:35
<3>System[1]This device has encountered a hardware failure. NIM 0 has p
owered down. Please contact Support for a possible repair/replacement.
==============================================================================
Message 16/129 Syslog Message 07.21.01.0015 08/06/2011 13:04:35
<3>Dune[1.dTcmTask]FAP 0, slot 1 detects a SPI4 error FAP21V_SPI_B_SOURC
E_FRM_ERROR(1) (reg=0x0000000a)
Solution/Workaround
Please
contact the GTAC for assistance.
Workaround: To restart a halted module, deinsert/reinsert it within its slot.
