Article ID: 12603
Products
S-Series
Symptoms
Possible module reset.
"Dune[<
slot>.dTcmTask]FAP 0" errors visible in the output of a 'show support'.
For example:
Message 5/73 Syslog Message 07.01.03.0004 11/11/2009 10:57:48
<0>Dune[3.dTcmTask]FAP 0, slot 3 detects a recoverable error FAP21V_MMU_
PDC_SYNC_ERR(2). However, maximum number of auto-recovery is exceeded.
Board is reset. ( 0x00cb98c4 0x0171fce0 0x018182f8 0x0196abb4 0xeeeeeeee )
Message 6/73 Syslog Message 07.01.03.0004 11/11/2009 10:57:48
<3>Dune[3.dTcmTask]FAP 0, slot 3 detects a recoverable error FAP21V_MMU_
CRC_ERR(2) ... auto-recovery.
Cause
The Fabric Adapter (FAP) is detecting errors.
Solution
Please
contact the GTAC for assistance.
