Hi, Very quick question. I’ve got to make a change to a topology to use L3. Predominantly because we are also going to use that same topology for a new internal captive portal. Example below...
I am attempting to block client to client communication on B@AP topologies. I found this: https://extremeportal.force.com/ExtrArticleDetail?an=000080875 But just like it says th...
We have all of our iPads on the same vlan tunneled back to the controller. We are unable to get airprint to work. Considering these are all on the same subnet it seems rather straight forward. Is the...
Hello,
Is there a way to prevent an Identifi access point from rebooting after 5 minutes? The access point isn't connected to an controller at that time (he do not know any suitable controller),...
Another Access point type 3935i is visible.
It's not a L3 problem, there is connectivity and the access points are getting an ip address like the access point which is visible.
We are using 3825 and 3935 series access points. We recently deployed Lenovo 100e gen 2 chromebooks, replacing Lenovo N22 and N23 series chromebooks. This week we have had a large numb...
Hello,
I hope someone can help me on this issue.
After selecting the SSID, the wireless client makes its DHCP discovery, this arrives at the DHCP relay (switch) and is sent as unicast to t...
Hi there, Where would I go about acquiring a copy of the GPL-licensed modifications to the Linux kernel made by Extreme Networks to build the firmware beneath the Extreme Networks WS-AP3825i...
Hello all, so I have an Extreme C5210 controller with MULTIPLE ap's. For some reason 3 ap's seem to be acting weird.
I have 2 SSID's running off them. Let's says...ABC (g/n) and XYZ (a/n/ac)
...
We have 2 C5210s in high availability pair running version 10.51.04. When we remove a VNS from the load groups on the controller to which they are assigned the radios remain checked and greyed out o...