Hi Sirs for universal 7520 series I have some questions . GA time of 7520-48Y-8C & 7520-48T-6C is July-2023 , but GA time 7520-48YE-8CE is Nov-2023 ,so GA time of 7520-48Y-8C ...
So our main stack consists of X460G2 stack master and some X440G2 between the master and couple of more X460G2. The system stacking is a ring using the 460G2 vim modules and the X440G2 re...
Hi,
how i can i view the full mac adresstable. (CISCO equivalent show mac-adresstable)
I tried show mac.
But i cant believe that this is the mac table.
I tried with the tool macof to spoof...
Dear All,
can someone suggest a place where I can find the official extreme price list for the following:
1) TAC and OS SupportAdvance Edge Licence
2) RMA
thank you
Hello, I have recently replaced a SecureStack A4H124 stack member: removed a 24 port unit and replaced with a 48 port one (both were A4H124-xxP). Now, ports 25 & 26 (which were the stack ports ...
Hello, i really need some help here. i am replacing a x460 stack with a x590 stack, i cut in new 590 stack but was unable to ping some gear on a subnet. very odd issue here. i have 66 vlans, l...
Copper port not getting up between 2 extreme 220 series switches. The copper cable length is around 90 meters. But when we connect both these switches back to back (means at same location) then the p...
I have a port-channel between a Cisco 4500 and a summit x450 with two interfaces. When monitoring them, I only see the traffic through one interface, it is not distributed by the second member.
Dear All, I am new to the extreme network infra and previously I worked for Cisco and Juniper. Is there any syntax document related to each (like configuring l3 vlan, l2 vlan, ospf, trunk etc)
Hi, We have eight VSP-8404 that were recently upgraded from 6.1.3.0 to 8.0.7.0 and after the upgrade one of them has started sending a temp high trap. rcn2kCardZoneOverheat [1] rc2kCardIndex.0 (I...