...orwarding mgmt-vrf" when in the path of "conf-Ve-100" assuming the above is true, there is no option to "vrf forwarding mgmt-vrf" Here are the only available command in "conf-Ve": sw0(config-Ve-1)#h...
There is two part of the question here. As I asked before, if it was possible to use an ordinary USB flash drive. I couldn't get it to work. I formatted it FAT32 with a partition under 2...
all of the sudden the VDX6740 just "crashed"... and it restarted itself... but after reload itself. All the license was intact. However, all my config is gone. So my question is, is ther...
Hello, good morning everyone! I recently bought a BC 6510 switches that have the PROM password set. Could someone help me to recover? My recovery string is : 0nasdIKewSsGgAZbascQnQ== I...
Good afternoon all, I've managed to lock myself out of a switch this afternoon (can't remember the prom password I set yesterday) Could someone help me out with the recovery string please: ...
Once again I am confused with the context between rbridge and interface to assign an ip address. If I wanted to connect a port, TE 1/0/24 to an internet firewall/router. Which one is th...
I need to bond two links from an AP, the AP only support SRC MAC+DST MAC, DST MAC, and SRC MAC. I didn't see one that match in the manual.... What load balance sho...
Reading through the CLI manual from 7.4.0, there is a dhcpd server since 7.1.0 how does one configure the scope for the dhcpd I couldn't find anything how the config file should look. Or...