Our site is moving platforms from Cisco to EX - Fabric
Struggling to get my head around converting from Cisco CLi> VOSS CLi.
How can I locate a singe MAC address to identify the single port it is connected to. I see various suggestions, but they all seem to output every single MAC address for every 'trunked' device, rather then concisely identify one MAC addresses which is set on a static VLAN with port location. - or I get a syntax err.
i.e VOSS equivalent of Cisco - sh mac address-table add xxxx.xxxx.xxxx or sh mac address-table int xx.xx.xx
