how reset ap-7612?

[WallyGBR83]

Hello all,

I bought online a used ap-7612 but nor me nor the seller know how it was configured.

when connected to my lan seems that is not configured to take an ip from dhcp.

how can i discover if and which ip was configured statically?

or, better, how can i reset it to factory defaults?

thanks

[WallyGBR83]

What about the TTL port on the back? I already have an usb to ttl interface

[WallyGBR83]

Hi,

thanks for your reply.

Behind that hole there is nothing

it is for mounting to a wall.

also opening the case i can’t find any switch on the electronic board.

Meanwhile i’m waiting for your reply i found the ip address using a sniffer… wireshark.

However i don’t have the password and default one doesn’t work.

[Ovais_Qayyum]

Hi WallyGBR83,

I believe it has a reset button. You can press and hold it for 10-15 seconds while the AP is ON and then release it, AP will reboot and should get reset. Login by using default credentials admin/admin123.

If that does not work then use “AP Discovery Tool” which I have shared here:

https://extremenetworks2com-my.sharepoint.com/:u:/g/personal/mqayyum_extremenetworks_com/EfSQ4KCQWup... 

Hope if this helps.

Regards,

Ovais