slow SNMP polling SSA-T1068

[Sony_Francis]

I am new to SNMP polling, and gathering information in this manner. I am trying to get a SolarWinds SNMPwalk.exe utility to work against my SSA-T1068 switch. I am able to get information, but it seems very slow to respond. I thought that if I point to the host IP of the management port of the SSA, and I put in "1" for the starting point of the OID, it would come back in 10-20 seconds. It seems to take a minute or 2. Is that normal? I'm trying to work with another group that does the SNMP management, and they are questioning if the switch is working right. Any thoughts on this?
Sony

[Bastian_Sprotte]

Hello,

in S-Series we use an MIB function called Time-Filter MIB. Often MIB-tools not correctly support that function. so we added an command on the S-Series to help these tools.

try this command:

set snmp timefilter break enable

this should cover the Time-filter function for the SNMPwalk you do.

-