cancel
Showing results for 
Search instead for 
Did you mean: 

timeout on switch interconnection

timeout on switch interconnection

Joe_Lwe
New Contributor
Hi, I have used patch panels on both sides and crossover patch codes to interconnect x450a-48p switches.. but am getting request timeouts on host computers.. and switches blink like stp problem (cisco).. NB i have fibre interconnecting switches.. i need to add ethernet to increase bandwidth but now am confused. Please advise.. thanks
3 REPLIES 3

Ron_Huygens
Community Manager Community Manager
Community Manager

Erik_Auerswald
Contributor II
If you want to use two (or more) parallel connections between two switches to increase bandwidth, you need to configure port sharing (also known as a Link Aggregation Group (LAG) or a Port-Channel).

Nick_Yakimenko
New Contributor II
You need to build ether channel on Cisco side, and lacp lagg on extreme side. Also, you don't need to use crossover patches, because ports are auto MDI/MDI-x
GTM-P2G8KFN