Scripting - Page 12 - Extreme Networks

Scripting

Questions and discussions about scripting

Forum Posts

Sorted by:

Start a conversation

Help with LSX XML File - Fortiweb 400C UDSM

Hi, I'm in the process of defining a LSX for FortiWeb device, which are current shown as unknown (UDSM) by Qradar. Fortiweb 400C Serial Number FV400C3M13000193 Firmware Version FortiWeb-400C 5.06,build0091,140212 Here is the XML file: ...

what is commands to configure dns in extreme switch?

what is commands to configure dns in extreme switch?

enterasys A4 Copy firmware From Switch to PC?

Greetings to you I'm tired from searching in Google about " how to save current firmware in switch to PC , The main goal from this is take a backup I Know how to save config file to my pc it's easy by using this command A4(su)->show config...

How to block traffic to specific udp/tcp ports

Hi all, I try to block traffic on specific tcp/udp ports on my x450a switch I tried that with an ACL packed in a .pol file entry udp_acl1{ if { source-address 0.0.0.0/0; protocol udp; destination-port 1119 ; } then { count udp ; deny;...

Using EDP output in scripting

I would like to use sh edp ports all in script to indentify trunk ports. Created script, loaded it and got error in that line. Is there some limitation to this? " ... set var CLI.OUT " " show edp ports all set var inputA $TCL(list ${CLI.OUT}) set ...

Top Kudoed Authors

User

Count

3

2

1

1

1

GTM-P2G8KFN