Planning to have stacking using ethernet port in X440 24P switch,when you say port 25 and 26, does it means its the 23 and 24 port or the 21 and 2 optical port? I supposed port 23 and 24, need some confirmation.
I need to set port parameters on different switch and I need to configure only the ports belonging to a given VLAN. And more than this, only to Untagged ports.
So which is the best way ti build such list? Scanning port by port and mark which belong t...
Hi,
In my network architecture if a ospf route disapear (redistribued static routes by ospf) in a BD8K I must desactivate an ACL. So I want to use UPM script to do that.
I would like to know if there is an event ems which would match with my reques...
Is there a list of all Extreme VSA's that I can pass back to our switches from our NPS server. Currently we just pass back a vlan that machines should be dropped into. I would like to see if there is anything else we could do. (run ACL on the port,...
We are running Extreme switches in multiple buildings. We have netlogin dot1x and mac on all the ports. They all authenticate pretty good. Our first building we did as a POC. When a phone is plugged in it authenticates fine and when the computer ...
