Hi guys
Is it possible to activate Band Steering (moving clients to 5 GHz band) without Load groups?
The customer request is to enable this feature on all access points. Due to huge number of APs and effort needed to create spearate Load groups - ...
Hello guys,
I plan to install access points that can be directly connected via fiber -> AP3767e.
This AP uses external antennas and I'm not experienced with external antennas and therefore have some questions.
If the AP should p...
Our experience is the same, new APs mainly select the same channels. Even if they are in the same room, they very often have the same channel. This channel selection will be retained as long as DCS is in Monitor mode or in active mode with high tresh...
We have the same problem. In the past a reboot of the Controller solved it.
Reboot, power cycle of the APs and factory default do not fix the problem. I will open a GTAC case.
Problem seems not be related to routing or firewall rules. We have some ...
Hello Joshua,
I've asked the responsible colleagues. They use syslog-ng and it's possible to define filters in syslog-ng and create specific actions when these filters apply.
We use the following filter and write into MySQL database:
filter ...
We have a script, that greps the syslog file and counts the session poll disconnects (tunnel down) messages. Then we manually check APs that have more than 20 disconnects per day.
Oct 12 01:01:13 192.168.1.9 events: RU Session Manager Wireless AP s...
Hello,
to analyze performance problems, you have to deliver way more information.
What means "slow"? Slow response times, low throughput?
When have you installed the AP3805i? Is this a new installation? Does the problem exist since the beginning...
