I have a network with two N7 (2 x 7G4280-19 blades) in the core and several stacks with secureStacks B and C in the access. Almost all access stacks are connected to the two core boxes (N7). The two core N7 are interconnected with two 10G links in la...
Hello.
I have a customer with Cisco infrastructure and NPS Microsoft Radius and they are using MAC auth. (MAB) for the Cisco phones. I'm running some tests with a Summit X460-G2.
I have netlogin configured on port 1 to authenticate an IP ...
Correct me if i am wrong:
In NetLogin by mac address, the user and password sent by the Summit to the NPS are capitalized(uppercase) . As the case sensitice password, how can I make the switch to send the password in lowercase?
Best Regards
VB
I have the netlogin 802.1X client authenticated with sucess, but why always I have immediately before a failed authentication mac address from the same client?
03/11/2016 16:40:31.77 Network Login 802.1x user host/TDT34349.corporativo.pt logged in...
I have MAC and DOT1X configured, because in most of the ports i have IPphone and a PC behind the phone. MAC autentication for the Phones and DOT1x pfor the PC. NPS is the radius server and configuration is:
configure netlogin vlan Authenable netlogi...
