Walt,
There are 2 commands you need to do to give your access point the ability to use "at" power.
Looks like you did the first but probably didn't realize you needed the second:
set port inline ge.1.15 type "power hungry AP" powerlimit 34000 capabi...
Wow, that doesn't sound like the Extreme I know. Did GTAC actually tell you you needed to pay for the intervening years of no service in order to get new software?! You may have to ding the sales folks who are usually really good about things l...
Hi John, I don't think I've ever seen a query quite like yours but here's my solution: Just ignore the Routing and advanced features. They are not performance impacting if they are not configured to do anything. You probably want to start w...
Hi Travis,
Short answer: Yes
Longer answer:
The MGBIC-LC01 are spec'd. at 220m for 62.5u cable (OM1)
They will run 550m on 50u cable (OM2, OM3 and OM4)
So you can push the distance farther with the 50u cable.
If you need to push even farth...
Hi all,
You have stumbled on a piece of deficiency that I have grumbled about before. Not only do stackables not tell you when a stack member does not come up from a power down/reset, chassis have the same issue. Worse, they forget to tell you a...
