Extreme Networks

Kevin_Sanders · 12-08-2015

Here is what I have today: 1. Two sites with interconnected dual core (chassis) switches. Site 1 is Extreme BD8810s. Site 2 is Brocade chassis switches. 2. Both sites running vrrp (for local vlans) and ospf. 3. Each site has it's own default gateway...

Kevin_Sanders · 12-11-2015

Thanks all ... I looked at SummitStack-V and it is only for 10GB ports (our links are 1Gbps from the ISPs and the x440-8t is not supported. I'll take a look at MLAG on both the Extreme and the Brocade.

Kevin_Sanders · 12-11-2015

Wong Peng Leong, thank you very much for your reply. I still have the x440-8t switches at each site. I am going to read up on SummitStack-V tomorrow as I am unfamiliar with it. Unfortunately, the ISPs are different for each of the 1Gbps dark fiber co...

Kevin_Sanders · 12-10-2015

old config using x440 stacks at each site to create a sharing for the old (2) 100Mbps fiber links

Kevin_Sanders · 12-10-2015

Kevin_Sanders · 12-10-2015

Thanks! Do you know of any appliance that will allow me to trunk the (2) 1Gbps links and not introduce a single point of failure? Kind of tough with the fiber connections. In the past we had a pair of x440-8t switches stacked at each site with 100M...

Extreme Networks

User Statistics

User Activity

intersite connectivity - dual fiber, dual cores, dual vendor cores - suggestions?

RE: intersite connectivity - dual fiber, dual cores, dual vendor cores - suggestions?

RE: intersite connectivity - dual fiber, dual cores, dual vendor cores - suggestions?

RE: intersite connectivity - dual fiber, dual cores, dual vendor cores - suggestions?

RE: intersite connectivity - dual fiber, dual cores, dual vendor cores - suggestions?

RE: intersite connectivity - dual fiber, dual cores, dual vendor cores - suggestions?