I can't configure SNMP, tried all sorts of options, downloaded MIB, as a result, a complete zero. The switchboard does not provide any information. What could be the reason? Community-String Community-Access View Name IP Address-----------...
Thanks!Information content is zero :(((( Port Temp Voltage Current Power Power TX LOS [Volt] [mA] [dBm] [dBm] Fault-------- ---- ------- ------- ------- ------- ----- ---0/49 N/A N/A ...
Suddenly someone will need it, so that they don't suffer like me. (Extreme 210) >en(Extreme 210) #configure(Extreme 210) (Config)#snmp-server group "public" v2 read "Default" write "Default"(Extreme 210) (Config)#snmp-server community-group "public" ...
Someone can show in a working example how to configure Extreme 210 snmp, because I can't do anything I set up different devices from different manufacturers, but this switch was too much for me.
