Dear Experts,
I found if I define the remarking command first and then define a new ACL, then the new defined ACL will follow that remarking action and use the newly defined remarking value for outgoing traffic;
Yet, once I changed the rem...
Hi Expert,
If I want to enable Ring topo from Daisy-Chain Topo for a SummitStack with 3 switches inside, do I need to restart the whole switch to make them take effect or no need? Just connect the stacking cables to the stacking port to each switch...
Hi Experts,
Here I just want to bother you with one little query. For the stacking ports on SummitStack module, do we need to manually enable them or the two stacking ports will be enabled automatically once inserted to Summit switch?
Thanks.
BR...
Hi Experts,
May I know if stacking modules for Summit450 is supporting hot-plug? Meaning if I can plug it onto SW when the SW is running in live network?
Thanks.
Hi Experts,
I have issues on bootprelay function on my Summit460.
Topo as follows:
client server----(tag 983)Switch(tag 981)----Jumpstart server(DHCP server)
I have defined the Bootprelay on my switch but the DHCP relay fails all the time and I ca...
Hi Grosjean,
-Version is ExtremeXOS version 15.6.3.1 v1563b1-patch1-3.
-I checked the "show diff replacement" for each case, the value in output is the same as defined in "config diffserv replacement qp7 code-point xx"
-Yes. The behavior is the same...
Hi Bradon,
Many thanks for your reply. I attached some capture files and config.
http://pan.baidu.com/s/1pJKPEEf
Please also be noted that not all config is related with this case. The useful ones are as listed below:
1. Port 25(ingress traffi...
