Hello Chad,
Since you have already set this up for your site you can do the following.
1. Right click on a device(s) and select Device > Configure Device.
2. Change to the VLAN Definition tab and click the Synch for Site button.
3. You should ...
Hello Tiburcio,
We have no current way to configure those labels to be longer.
As a potential work around, you could add a text annotation of the long name to the map for those devices.
Hello Ilya,
If you just have one network interface then all you need to do is change the IP and then restart the XMC server services. The server should bind to the new IP.
If you have more than one network interface and would like to use one over ...
Hello Alberto,
You will not be able to get the actual temperature from the A4, but you can get a status to see if it is in a normal range. The OID to query would be:
chEnvAmbientStatus=1.3.6.1.4.1.52.4.1.1.8.1.2
Which has values of:
chEnvAmbient...
Hello Ahmed,
One thing to note when creating the port element group is that you should use the FlexView that will be querying the ports to create them. First open that FlexView, set the poll frequency to 0 and then retreive the results. From here ...
