I see large amounts of ARP traffic from the network with a single client on a test SSID bridged on a production vlan.I have proxy-arp enabled by default, or at least I think so (see https://docs.aerohive.com/330000/docs/help/english/ng/Content/gui/co...
We must provision a few hundred XIQ APs to use our Site Engine NAC and related RADIUS servers in the same way our wireless controllers do.Extreme Control has the concept of "switch" IPs that are IP addresses configured as authorized to contact a RADI...
I'm banging my head on an Extreme Wireless Identifi EWC C5210 where some traffic is still directed to an old VNS>Topology (VLAN) after we updated all VNS>Roles to a new set of Topologies (VLAN).When I try deleting the topology, iIt seems that it is r...
When configuring a channel plan for smart RF, we can choose "all channels", which according to documentation
includes UNII-1 UNII-2A UNII-2C and UNII-3excludes TDWR channels 120 124 128
In Italy regulatory domain where my APs are based UNII-3 is not ...
Are AP510C/AP510CX universal APs, capable of connecting to Extreme Cloud or to Extreme Campus Controller?We own many AP410C universal APs connected to our ECC, looking forward o expand our hardware.Thank you for your attention,jan
You can't control neighboring APs, just coexhist with it. Do the Ekahau survey and analyze it, if you want to learn, put it in Ekahau cloud and get the optimization insights, it's a nice feature.
Hard to say @Macknkss , depends on number of stacked floors, floor attenuation, channels used. I assume you use all the available 5 GHz channels. Check the Radio Profile and if needed create a custom Radio Profile with all the channels you need. The ...
Channel switch depens on thresholds, timing and other logic that are configurable. You don't want an AP flapping between channels.You can control it in Configure > Common Objects > Radio Profiles > Advanced Settins > Dynamic Channel SwitchingPro tip...
I also prefer manual channel plans, up to a certaing total numer of APs. When you deal with the hundred/thousand numbers, manual channels are hard to manage.
