I have a physical ports issue with my new Extreme Stack topology (2 slots); the master slot (Switch 1) is showing a NON-expected behavior on SFP electrical ports, when the Switch boots up after...
Hardware: Summit X670G2-48x-4q
ExtremeXOS version: 188.8.131.52
I hope you can help me in this little issue, I am trying to bring up a BFD session in a p2p link from my x670 Extreme Stack with a Huawei Router ME60 in the other side, I have...
I performed a tcp dump in a server of my current network and I'm getting lots of VRRP announcements in this vlan (where server belongs), This server is directly connected to the pair of Summit x460-48t where I have the VRRP configured.10...
I have 2 extreme switches x460-48t on a Trial on Customer Network, The Core licenses are already purchased, but the 30 free days are running out, so, I know that the Trial License could be extended another 30 days, but which is the proce...
I experienced some high-temp scenarios, but not in real time, I can just share with you that when the Switch detects a high-temp outside the acceptable values, it raises a warning in the log like this:
25-06-2018 11:46:01.66 Function pointer...
Thanks for your replies, here is the topology
And I found the Configuration as follows:
create vrrp vlan EXT vrid 50
configure vrrp vlan EXT vrid 50 priority 200
configure vrrp vlan EXT vrid 50 add 10.49.8.6
enable vrrp vlan ...
Hi, Bill & Tuang,
Yesterday my current License's status was 8 days to expire the trial, I applied the following commant: "debug epm enable trial-license" directly on the prompt, and with this, the Trial License was extended for 30 days more, without...