Hi Alexandr, Yes, we can configure port partition on Summit X690 switch. the command is “configure ports <port_number> partition 4x10G” you need to reboot the switch once you execute the command.
Hi,
First we need to generate license key from support portal using the voucher ID. Using the generated license key you can enable license.
Please use the steps in the article to generate license and install license,
https://gtacknowledge.extremenet...
Hi,
If the downstream device (e.g. switch, server, etc..) is using LACP LAG sharing on its ports, it will be necessary to enable LACP LAG on the MLAG ports. This has to be done prior to enabling the port for mlag
enable sharing port grouping al...
Hi Tino,
Please login to the particular slot by "telnet slot " from the master or console to the particular node and check the output of "show switch" to check the individual node's uptime.
