Hi Guys,i have a question. After successfully onboarding (The XIQ-SE shows up as online in XIQ) the XIQ SE to the XIQ i added a switch to XIQ SE. All Switches i add get stuck at Pending License. What did i wrong?Regards
I just wanted to add:The NP state remains after reboot if auto-discovery is not disabled. You have to add this command in the article before the reboot:configure stacking-support auto-discovery disable
Greetings
Maybe the easiest way is to implement the nac und sort for ips and scroll through all ips to see a duplicate.... or just configure elrp on the edge switches... maybe there is a pyhton task solution but thats something i am not used too
SymptomsExtreme Management Center was being used to fully manage third party devices via Extreme WebShell Terminal, execute CLI Commands and/or backup / restore configuration Archives using CommandScripts.The above functionality all stopped around th...
Example : 1. Update Master Node2. Reboot Master Node (Wait till eaps ring is up again)3. Update Partner Node4 Reboot Partner Node (The Old master should now be the current Master again)5. Update and Reboot all Transit Nodes (This can happen in one st...
If you are connected to the console you can turn on console logging permanently using this command:enable log displayTo disable this again:disable log display To get logging on your screen in a telnet or SSH session, you can enable this for your curr...
