Capacity planning/ ports not used for some time

  • 0
  • 2
  • Question
  • Updated 3 years ago
  • Answered
Is it possilble to generat a report with ports whitch are not active for some days or month ?
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,876 Points 3k badge 2x thumb

Posted 3 years ago

  • 0
  • 2
Photo of Taykin Izzet

Taykin Izzet , Employee

  • 3,246 Points 3k badge 2x thumb
Johan,

It is possible to generate a report of Used/Unused ports on a device using the Capacity Planner Tool from within Inventory Manager. The report can be generated on a given time period.

(Edited)
Photo of Johan Hendrikx

Johan Hendrikx

  • 3,876 Points 3k badge 2x thumb

This works. But can I olso generate a report with ports that are not used since  a periode (30, 60 days).

This report only has information that there is no link.

Photo of Curtis Parish

Curtis Parish

  • 3,332 Points 3k badge 2x thumb
Unless you have link traps set up I do not know any way of determining the date a port went up or down.   I usually look at uptime on the switch and look for ports that have zero counts. 
Photo of Curtis Parish

Curtis Parish

  • 3,332 Points 3k badge 2x thumb