how to access ap-3825i web interface

  • 0
  • 1
  • Question
  • Updated 5 months ago
  • Answered
how to access ap-3825i web interface
Photo of Mikaeil Beigpour

Mikaeil Beigpour

  • 550 Points 500 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,854 Points 5k badge 2x thumb
Hi,

The AP3825i can be configured through Wireless Controller or SSH or serial port.

if you want to use web browser then navigate to your controller and manage your AP through your controller.

Best regards

Z.
Photo of Mikaeil Beigpour

Mikaeil Beigpour

  • 550 Points 500 badge 2x thumb
hi
how to enable without controller?

Best regards
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,854 Points 5k badge 2x thumb
The AP3825i can be configured through Wireless Controller or SSH or serial port.


So you can install on some computer HTTP-to-SSH proxy. Then you will be able to use HTTP and the AP will be configured through SSH.


I believe there are also some terminal servers available on the market = you will connect to the terminal server over http and you will see the serial port output in your browser.


Good luck


.Z
(Edited)
Photo of Mikaeil Beigpour

Mikaeil Beigpour

  • 550 Points 500 badge 2x thumb
i connect with serial and putty but not active at controller.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 49,962 Points 20k badge 2x thumb
You configure the AP via the WLAN controller GUI.
This isn't a standalone AP = you need a controller.
Photo of Andrés Zuleta

Andrés Zuleta

  • 80 Points 75 badge 2x thumb
Thanks for you response,

Let me ask you one more question: ¿for Controller you mean a Device or a Software?. If a software, could you please tell me how to get it?.... 

if a device, you mean i can't set it up any other way?... so the device (controller) has to be connected on the same network always ?

Thank you.
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 49,962 Points 20k badge 2x thumb
Here a link to the controller list / datasheet...
https://www.extremenetworks.com/product/wireless-controllers/

You'd run it in VM (=V2110 model) or have a physical controller, either one need to be bought from a Extreme partner.

In a real scenario the AP is always connected to a controller (don't need to be on the same subnet).
Photo of Ronald Dvorak

Ronald Dvorak, Embassador

  • 49,962 Points 20k badge 2x thumb
forgot to add the Cloud solution = certain APs could be managed via the Extreme Cloud (=subscription model)

Here the link...
https://www.extremenetworks.com/extremecloud/
Photo of Andrés Zuleta

Andrés Zuleta

  • 80 Points 75 badge 2x thumb
Thank you so much... so now i know this ap is useless for me because i don't have the controller. 
Photo of Pala, Zdenek

Pala, Zdenek, Employee

  • 9,854 Points 5k badge 2x thumb
Donnot understand how serial port connection is related to your AP status in the controller.
Photo of Umut Aydin

Umut Aydin, Escalation Support Engineer

  • 2,300 Points 2k badge 2x thumb
No web access possible.
This is not a standloane AP. Thin AP only configurable over controller web gui.

set AP to factory default and  check your license.