cancel
Showing results for 
Search instead for 
Did you mean: 

How to change statistic sample intervals?

How to change statistic sample intervals?

Wanderley_Benac
New Contributor
Hi community,

I am collecting port statistics on Summit 48si, but values are set to zero at end of sample interval according to MIB description, see example below:
- OID: 1.3.6.1.4.1.1916.1.11.1.1.4 extremeRtStatsUndersizePkts
- OID Description: The number of packets received during the last sampling interval that were less than 64 octets.

My questions are related to sample interval mention above:
- What is default value of Sample Interval?
- Is there any way to change Sample Interval value?

Thanks in advance for all collaboration,
Wanderley Benacchio Junior
1 REPLY 1

Ty_Izzet
Extreme Employee
Wanderley, per the extremeRtStatsIndex, the description states "The last sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the RMON historyControlEntry which set up the parameters for a regular collection of these samples".

Please review the MIB in use for any RMON OIDs and see if there are any options there.

GTM-P2G8KFN