How to replace Priority of Vlan?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I have an untagged Port sending frames with Priority Value 0 to the receiver. I want that Priority value 7 is received. That is when the untagged Port sends the frames with Pri 0 the tagged port receives them and replaces the Pri with 7. 
Photo of Danial Jalil

Danial Jalil

  • 912 Points 500 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Mike Thomas

Mike Thomas, Employee - GTAC - NMS

  • 7,640 Points 5k badge 2x thumb
What product are you using? Not all are capable of re-writing a tagged packet.
Photo of Danial Jalil

Danial Jalil

  • 912 Points 500 badge 2x thumb
Extreme Network x670v
Photo of Henrique

Henrique, Employee

  • 10,302 Points 10k badge 2x thumb
Hi Danial, please see the article below and let us know if that helps.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-mark-incoming-frames-with-802-1p-va...
Photo of Kawawa

Kawawa, GTAC

  • 3,292 Points 3k badge 2x thumb
This resource should help: https://gtacknowledge.extremenetworks.com/articles/How_To/Configuring-QOS-profiles-and-verify-QOS-is... 

If you have any questions after reading through it, we can take it from there
Photo of Danial Jalil

Danial Jalil

  • 912 Points 500 badge 2x thumb
@Henrique It worked.. Thank you so much you are a life saver :)
Thank you so much everybody for the help :)
Photo of Henrique

Henrique, Employee

  • 10,302 Points 10k badge 2x thumb
That's great Danial! Thanks for the feedback!