Is there a user guide for netsight Alarms Manager.

  • 0
  • 1
  • Question
  • Updated 2 months ago
  • Answered
Is there a user guide for netsight Alarms Manager. I'm trying to create a trap that will alert me when a device has connected to our network and record and email the MAC Address and IP Address.
Photo of nola saint

nola saint

  • 350 Points 250 badge 2x thumb

Posted 3 months ago

  • 0
  • 1
Photo of John Moore

John Moore, Employee

  • 444 Points 250 badge 2x thumb
Hi Nola,

What version of NetSight/Extreme Management Center are you running? I can guide you to the correct guide.

Thanks!

John
Photo of nola saint

nola saint

  • 350 Points 250 badge 2x thumb

Netsight 8.0.4.54.  Thanks John,



Photo of John Moore

John Moore, Employee

  • 444 Points 250 badge 2x thumb
Nola,

Here are the specific topics that should help you:

Alarms Manager Window:

http://emc.extremenetworks.com/content/console/docs/c_at_alarm_config.html

How to Configure Alarms in Alarms Manager:

http://emc.extremenetworks.com/content/console/docs/c_ht_alarm_config.html

How to Configure Custom Alarm Criteria in Alarms Manager:

http://emc.extremenetworks.com/content/console/docs/c_ht_alarm_criteria.html

The Alarms Manager information is embedded in the Console User Guide, which may contain additional topics relevant to what you're trying to do. That's located here:

https://documentation.extremenetworks.com/netsight/8.1/9035433_Console.pdf

You can find alarms-specific information in the Console User Guide PDF by pressing CTRL+F and entering your search parameters.

Hope this helps!

John
Photo of nola saint

nola saint

  • 350 Points 250 badge 2x thumb
Does extreme have any video training courses on Netsight.  My environment has a mixture of enterass and extreme OS. I need to see if Netsight has the same capability of Solar winds. Trying to find out which network device is using a large amount of bandwidth, find latency on the network and know when a configuration change has been made on a switch.