Multicast in AP-7522E

  • 0
  • 1
  • Question
  • Updated 9 months ago
  • Answered
Hi all,
I want to configure multicast (igmp snooping) in AP-7522E. But I can't find a guide to configure it.
Help me, Plese!
Thanks
Photo of Long Tran

Long Tran

  • 666 Points 500 badge 2x thumb

Posted 9 months ago

  • 0
  • 1
Photo of David Choi

David Choi, Employee

  • 1,966 Points 1k badge 2x thumb
You can configure igmp snooping under the AP profile.
Photo of Long Tran

Long Tran

  • 666 Points 500 badge 2x thumb
Hi David Choi,
I don't have Wireless Controller. And 7522E can't configure in Enterprise Guide or CLI. i read guide "WiNG Express Manager 5.8.2", but it does not have IGMP snooping.

Link "WiNG Express Manager 5.8.2": http://documentation.extremenetworks.com/ExtremeWireless/WING_EXPRESS_MANAGER_5.8.2_UG_MN-002678-01_...
Photo of Christoph S.

Christoph S., Employee

  • 2,560 Points 2k badge 2x thumb
SSH into the AP and run the following commands to see if it's already enabled by default:

>show run include-factory | include ip igmp
or
>show context include-factory | include ip igmp
You should see something like this:
 ip igmp snooping
 ip igmp snooping forward-unknown-multicast
 no ip igmp snooping querier
 ip igmp snooping querier max-response-time 10
 ip igmp snooping querier timer expiry 60
 ip igmp snooping querier version 3
 ip igmp snooping querier query-interval 60
 ip igmp snooping querier robustness-variable 2
 no ip igmp snooping fast-leave
What do you get when you run these commands?
(Edited)
Photo of Long Tran

Long Tran

  • 666 Points 500 badge 2x thumb
Hi Christoph,
I show in 7502E :

ap7502-75F4C5>show run include-factory | include ip igmp     
 ip igmp snooping
 ip igmp snooping forward-unknown-multicast
 no ip igmp snooping querier
 ip igmp snooping querier max-response-time 10
 ip igmp snooping querier timer expiry 60
 ip igmp snooping querier version 3
 ip igmp snooping querier query-interval 60
 ip igmp snooping querier robustness-variable 2
 no ip igmp snooping fast-leave

--> igmp snooping always enable?
Photo of Christoph S.

Christoph S., Employee

  • 2,560 Points 2k badge 2x thumb
Igmp snooping is not enabled by default. There is no option to enabled this setting from GUI or CLI on Express units. This can be enabled on Enterprise, but not Express APs. Have you tried enabling this setting on your switch?

Thank you.