Per release notes, the AP4020 is supported in 25r2 so you should not have an issue onboarding them. Please open a GTAC ticket so that we may have a look at it and troubleshoot.BR,
Yes, you may change add APs to your current deployment but firmware is key, what is the newest firmware for the old equipment that the new APs can use, if any. BR,
Hello @MauroADV,XIQ 25r3 is being rolled out at this time. Please wait to see if this is resolved with this upgrade. If not we'll test it at our end and raise an engineering ticket if needed. BR,BR,
Hello @brendav,You may want look at the AP3000 and 5000 series. Those will require a firmware upgrade though. so AP310, AP410, AP305C, AP410C. AP510C, AP3000, AP5xxx. EoL info can be found here: https://extreme-networks.my.site.com/ExtrArticleDetail?...
True, tested with cheap Amazon POE++ adapter which worked perfectly. The Ubiquiti POE++ injector was tested on multiple different AP models and OS's with same result. The issue definitely lies with the power injector. BR,
