multiple RP sources in one X460

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
I have a 460 with pim sparse to a external RP off my network. I pull 324 multicast via this sparse vlan.  the rest  of my network is currently dense, working as it is , I want to convert my entire network from dense to all sparse. which will cause me to have a different RP on my own network.  could i use the inter-VR solution to pass multicast from my current sparse Vlan (add it to a new VR) over to the current VR-Default network soon to use sparse?
 I was also considering using MSDP. thanks in advance,
Photo of Michael Suggs

Michael Suggs

  • 432 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of andreas

andreas

  • 1,218 Points 1k badge 2x thumb
I would recommend using MSDP instead. Or not sure how your setup is but mvr could work ? If you only have to listen to igmp on  the receiver sid you could leak it to a mvr (spares) vlan.
Photo of Jarek

Jarek

  • 2,398 Points 2k badge 2x thumb
Hi,

remember that MSDP is working only in VR-Default

--
Jarek
Photo of Michael Suggs

Michael Suggs

  • 432 Points 250 badge 2x thumb
have not cut yet, but i believe i will just point to the two separate RP's and use two separate policy's

configure pim add vlan "Video-10Gig" sparse
configure pim add vlan "IPTV" sparse
configure pim crp static 192.168.1.1 "MC-cspire" 0
configure pim crp static 192.0.2.1 "MC-bude" 0