Purview no working over NetSight...

  • 0
  • 1
  • Problem
  • Updated 2 years ago
  • Not a Problem
I have a Netsight lab running fine with my virtual appliance, installing the purview virtual appliance, setting up the sensor over netsight, but I do not get statistics.

In the purview configure the interfaces of mode 2 ie eth0 for management and eth1 for mirrored, however after 24 almost 24 hours I have no data on purview ... can I collaborate?

Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Mike Thomas

Mike Thomas, Employee - GTAC - NMS

  • 7,498 Points 5k badge 2x thumb
Try working with the following knowledgebase article to narrow down condition

https://gtacknowledge.extremenetworks.com/articles/Q_A/Wants-somebody-to-review-his-Purview-config-t...
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
Do you have any technical guides on how to fine tune my purview about Extreme Manager Center?
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb

tcpdump -i eth0 udp port 2055
Photo of Jeremy

Jeremy, Embassador

  • 9,788 Points 5k badge 2x thumb
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
Do you have any technical guides on how to fine tune my purview about Extreme Manager Center?

Thsk
Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
no working

Photo of Jairo Rojas Herrera

Jairo Rojas Herrera

  • 1,452 Points 1k badge 2x thumb
This is the status of my configuration, but it does not show me application information ... can someone help me?








Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,442 Points 3k badge 2x thumb
Hi Jairo,

What is the current status , do you still have issue ?

Could you make sure the configuration part step by step as per below article.

https://gtacknowledge.extremenetworks.com/articles/Q_A/Wants-somebody-to-review-his-Purview-config-t...


Thanks,
Suresh.B