shut down the socket

  • 0
  • 1
  • Question
  • Updated 2 months ago
  • Answered
Hello community,

I have some strange logs :

[AP1] %%%%>08:39:51.786: migration:mu migration: sender shut down the socket (migration.c:741)
[AP2] %%%%>08:39:42.758: migration:mu migration: sender shut down the socket (migration.c:741)
[AP3] %%%%>08:39:48.145: migration:mu migration: sender shut down the socket (migration.c:741)

ect...

when running:

remote-debug wireless rf-domain default clients XX-XX-XX-XX-XX-XX duration 300 events all

It's a normal behavior ?

ap6532 wing 5.7.2


Thanks,

Aviv Kedem

Photo of Aviv Kedem

Aviv Kedem

  • 1,400 Points 1k badge 2x thumb

Posted 3 months ago

  • 0
  • 1
Photo of Daren Ellis

Daren Ellis, Employee

  • 260 Points 250 badge 2x thumb
That behavior is normal, the device is Roaming and connected AP is sharing firewall session/mu cache with other APs.
Since you are capturing debug logs from the RFD you will see theses sort of messages in working environment.

Note:
In regards to the firmware version.
I highly recommend you upgrade to 5.8.5 or 5.9.1.4 depending on your controller/other ap hardware.
Photo of Aviv Kedem

Aviv Kedem

  • 1,400 Points 1k badge 2x thumb
Hello Daren,

Does it mean the virtual controller always opens sockets for each client on all ap's on the rf domain/layer 1 mint OR just on the relevant ap's the client roams between them ?

How can I  specify the lifetime of the sockets ?
There is some limitations about it?
Can I check the amount of open sockets and the lifetimes?

Thanks,

Aviv Kedem
Photo of Aviv Kedem

Aviv Kedem

  • 1,400 Points 1k badge 2x thumb
Any suggestions?

Thanks

Aviv K
Photo of Aviv Kedem

Aviv Kedem

  • 1,400 Points 1k badge 2x thumb
Anybody?
Photo of Drew C.

Drew C., Community Manager

  • 37,366 Points 20k badge 2x thumb
Hi Aviv,
Based on your two threads here, it sounds like you should probably contact GTAC so someone can take a closer look at your network to see what's going on.