Switch Flash Corrupted

  • 0
  • 1
  • Question
  • Updated 1 year ago
  • Answered
My customer is trying to upgrade firmware of Summit X350-48t but facing some issue flash corruption. Please advise any fix for corrupted flash
Photo of Waqas Naeem

Waqas Naeem

  • 896 Points 500 badge 2x thumb

Posted 1 year ago

  • 0
  • 1
Photo of Narayanan, Karthikeyan

Narayanan, Karthikeyan, Employee

  • 912 Points 500 badge 2x thumb
Hi Waqas,

Please let me know what's the version the customer is trying to upgrade?
Currently which version are they in?

Whats the error message they get during the upgrade?

Regards,
Karthikeyan
Photo of Roy Noh

Roy Noh, Employee

  • 948 Points 500 badge 2x thumb
(Edited)
Photo of Narayanan, Karthikeyan

Narayanan, Karthikeyan, Employee

  • 912 Points 500 badge 2x thumb
Hi Waqas,

What the current status of the switch after trying upgrade?
Is it got stuck in booting state?

Can you enter bootrom in the beginning by holding down spacebar? If so, select the previous image on the switch and then boot.

BootRom > show image

Please let us know the current status?

Regards,
Karthikeyan
Photo of Tripathy, Priya Ranjan

Tripathy, Priya Ranjan, ESE

  • 2,306 Points 2k badge 2x thumb
It seems there are many articles already available over  the web related to different error log messages noticed for the corrupted flash scenario. Hence until unless you specify those messages here it is very hard to point out the resolution for the same.

Anyway moving forward i will post the below article for your reference and check if they match your scenario or not:
https://gtacknowledge.extremenetworks.com/articles/Solution/Warn-DM-Warning-Error-11-writing-Node-Co...
(Edited)