ExtremeSwitching (EXOS/Switch Engine) - Page 277 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ELRP Not Working

Hi, I have a number of x450e switches in stacks across my estate. All stacks have been configured with the following elrp config: # Module elrp configuration. # enable elrp-client configure elrp-client periodic PCs ports all interval 1 log-and-trap...

ELRP and tagged/untagged

SW-Versions summitX-21.1.5.2-patch1-5 / summitX-22.6.1.4-patch1-1We use ELRP (Extreme with Extreme) and STPD-BPDU Protection (Extreme with Other vendors) to prevent loops.Last Week, someone wired a port with tagged vlans (netlogin-Protected) with a p...

AVB - SummitStack

Hello, all! As I can see in User Guides (22.6, 30.1) AVB isn't supported on SummitStack. (why so?) Is there information about plans to support AVB on SummitStack? Thank you!

A vlan is generating a lot of packets to cpu in show l2stats and increased CPU in 4%

A vlan is generating a lot of packets to cpu in show l2stats and increased CPU in 4% . I did; * PACHAC-EXTRE.27 # clear l2stats vlan v57 * PACHAC-EXTRE.28 # show l2stats v57 Bridge interface on VLAN v57: Total number of packets to CPU = 1078. Total...

2 Virtual Routers & MLAG

Is it possible to have 2 Virtual Routers on a switch and connect them up to 2 switches via MLAG? Building Routers is x460-G1 2 Upstream Switches x670G2-48x-4q I have the Building Router connected up to 1 upstream switch with the 2 vrs (pretty muc...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN